Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13701623
- Product Categories
- Friendly Links
- home > Supply > Gas insulated joint insulation joint supply manufacturers a large stock / price / picture
Information Name: | Gas insulated joint insulation joint supply manufacturers a large stock / price / picture |
Published: | 2015-04-16 |
Validity: | 30 |
Specifications: | 15-1200 |
Quantity: | 5000.00 |
Price Description: | |
Detailed Product Description: | Product Overview: insulated joints are both buried steel pipelines require sealing can, collectively, the dielectric strength of energy and electrical energy required for corrosion pipe joints. It contains the assembly, insulating plate, packing, sealing rings, short sections. Structural features: Insulation extrusion welded joints with the overall pattern, not the use of bolts, flange connection type. Insulated joints using the insulation and sealing material sandwiched and fixed sleeve (assembly) of the type. After assembling insulating joints, each internal components should be fixed at the appropriate location. Under pressure in the soil, the provisions of the pipeline operating pressure and the factory or in the field of hydraulic test, the entire insulation joints intact. Insulating joint sealing element against the insulation board inside the joint, with a permanent bombs, and both sides of the sealing element does not move in direct contact with the bare metal surface, ensuring tight joints. 2, structural features: Insulation extrusion welded joints with the overall pattern, not the use of bolts, flange connection type. Insulated joints using the insulation and sealing material sandwiched and fixed sleeve (assembly) of the type. After assembling insulating joints, each internal components should be fixed at the appropriate location. Under pressure in the soil, the provisions of the pipeline operating pressure and the factory or in the field of hydraulic test, the entire insulation joints intact. Insulating joint sealing element against the insulation board inside the joint, with a permanent bombs, and both sides of the sealing element does not move in direct contact with the bare metal surface, ensuring tight joints. 3, the product features: a, insulation can be good: 500V shake table testing insulation resistance ≥5MΩ, breakdown voltage ≥3KV. b, long life: the pipeline with life, such as strength. c, high strength: Pressure test ≥15PN (design pressure). d, temperature: -19-80 degrees. e, Medium: oil, gas, water, chemical raw materials, such as coal slurry. 4. Material Features: This product materials used insulation material meets the following requirements: high strength epoxy resin and fiberglass laminated composite materials, PTFE. Bending strength: Portrait ≥390MPa ≥290MPa transverse tensile strength: Portrait ≥340MPa transverse compressive strength ≥240MPa: ≥340MPa absorption: After the invasion of water resistance ≥5108Ω ≤30mg breakdown voltage ≥35KV combination steel body: Q235,20,16Mn, all types of pipeline steel. Short tube: 20,16Mn GB8163-99 X70 X65 X60 X56 X52 \ If necessary, please call to discuss, |
Admin>>>
You are the 10009 visitor
Copyright © GuangDong ICP No. 10089450, Hebei billion Swiss Pipeline Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 10009 visitor
Copyright © GuangDong ICP No. 10089450, Hebei billion Swiss Pipeline Co. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility